 "(FDTOC) Fire-Dex Turnout Coat")
Fire-Dex Turnout Coat outter shell shall incorporate three separate body panels, two front panels and one back panel. Shoulders shall be reinforced with a fourth layer of protective thermal material in addition to the already present three layers of shell, thermal and moisture barriers. The sleeves shall be two-panel construction, tapered design and set-in. Each
sleeve shall incorporate an underarm gusset in all three layers between the underside of the sleeve and the body of the coat. The collar shall be constructed of four layers. It will incorporate two layers of outer shell material and two layers of moisture barrier. The hook portion of the hook and loop fastener tape shall be sewn to the right front side of the collar. The moisture barrier shall be bound to the thermal liner around the perimeter of the liner
using an 1" FR Neoprene coated binding tape double needle lock stitched. Outer Shell/Liner Assembly Attachment The liner shall be secured to the outer shell by means of five, nickel coated brass snap fasteners along the leading edges of the left and right facings. XMDH Drag Rescue Device - A drag rescue device shall be located between the liner and outer shell of each coat. The drag rescue device shall be made of KEVLAR® webbing strap sized to the coat. The flap shall also feature a leather pull tab to easily access the drag rescue device with gloved hand.
- Coat Outer Shell: 7.5 oz. NOMEX IIIA - Yellow
- Coat Thermal Liner: (Q) NOMEX calendared facecloth quilted to NOMEX batt
- Coat Moisture Barrier: (T) Stedair 3000 on E89
- Coat Closures: Inner zipper / outer woven hook & loop
- Coat Trim Style: 3" NFPA standard - Scotchlite lime/silver triple trim Coat Pockets
- Coat Hand Pockets: (XP35) Semi-bellows cargo pockets, pair (10x10x2")
- Cuff Reinforcement: Shell reinforced cuffs (standard)
Be the first to rate this product!
